The reasons why our customers choose our glass machine.
1. The replacement of grinding wheels must be opened before the products can be processed.
2. The grinding quantity and feed speed should be matched reasonably to avoid breaking glass.
3. The glass must be uncovered from the outside to the inside, not any glass inside.
4. Inspect the size and quality of the glass after edge grinding, and the unqualified products will not flow into the next process.
5. Special-shaped edge grinding must be strictly processed according to the customer's requirements, template or geometric figure, so as to make the grinding surface smooth and smooth.
6. For high-quality glass with high requirements for appearance quality, the inspection of appearance quality should exceed or equal the quality and appearance requirements of automobile grade glass sheets.
7. When grinding large plate glass, the layout is more than 3_, the lifting hook and sucker must be used. When many people lift the glass edge grinder, they can't run and walk at the same pace.
8. Grinding quantity control: grinding quantity less than 8 mm is less than 2.5 mm, grinding quantity less than 10-19 mm is less than 1.5 mm, feeding speed less than 8 mm is less than 2.5 m, and 10-19 mm is less than 1.5 m.
9. Glass stacking after edge grinding: When the specifications (length * width) are different, paper must be separated at the junction of edge and edge (paper is about 100_ * 200_or thin rope) to prevent glass scratches.